This carbon-neutral festival promotes sustainable fun in Thailand

December 4, 2018 by  
Filed under Eco, Green

The fields are alive with art, architecture, food, wellness, talks and workshops, family activities and music at the fifth annual Wonderfruit festival in Pattaya, Thailand this December. Wonderfruit is a five-day, carbon-neutral event that inspires curiosity and encourages exploration of the unknown while promoting sustainable practices. Technically, Wonderfruit is a three-part festival with phase one in September, phase two in November and phase three taking place in December. Individuals and families alike will find copious entertainment options with more than 60 musical artists and dozens of massive art pieces displayed throughout the venue, which they refer to as “The Fields.” There are a variety of accommodations at the event for those who wish to extend their stay and nearly 55 farm-to-table food vendors to explore while you do. The event even brings in world-renowned chefs each year to offer guests delicious feasts with a side of educational opportunities. Related: Bjarke Ingels is crowdfunding a massive reflective sphere for Burning Man 2018 After you’ve stuffed yourself, had a drink and danced ’til you dropped, you can attend one of the 100 wellness activities focused on yoga, chakras, meditation, drum circle dancing, massage and more. Once you’re relaxed, dedicate yourself to learning something new via the 35 different seminar speakers and workshops. But there is no need to set a rigid schedule. The idea is to simply move about the campus, taking in something new at every turn where you might run into a pottery-making demonstration, football lesson, musical engagement, light show, fire dancing or dragon kite flying. The festival hours for phase three of the Wonderfruit festival are as follows, where you can take in one day or multiple: Thursday, December 13: 4 p.m.-midnight Friday, December 14: 8 a.m.-midnight Saturday, December 15: 8 a.m.-midnight Sunday, December 16: 8 a.m.-midnight Monday, December 17: 8 a.m.-12 noon (site closes at 12 noon) In alignment with the mantra, “Reduce, reuse, refill,” the venue does not allow any single-use plastic, so visitors should bring a reusable water bottle. Of course, you can support the cause by purchasing a reusable stainless steel cup on site or before the event at a discount. This cup also provides a discount on all drinks purchased at the event. All servingware at the venue is biodegradable , and organizers request that all attendees do their part to create as little waste as possible. Recycling and food waste bins are located throughout the venue, and all visitors are expected to use them accordingly. Overall, if you are looking for a day (or four) of fun and sustainability, this is a festival worth attending. + Wonderfruit Images via Wonderfruit

Original post: 
This carbon-neutral festival promotes sustainable fun in Thailand

Experimental prefab home eschews fossil fuels in Geneva

December 4, 2018 by  
Filed under Eco, Green

In the centrally located town of Lancy in Geneva, Switzerland, a compact and experimental timber home bucks the local archetype for concrete-based housing in favor of a more eco-friendly alternative. Swiss architect Leopold Banchini collaborated with engineer Marc Walgenwitz to design the light-filled abode — dubbed the Casa CCFF — using a prefabrication system that minimizes construction costs as well as waste. The small urban home was built for energy efficiency and assembled in just a few days by local carpenters.   Built overlooking Geneva’s industrial train station, Casa CCFF references its surrounding industrial environment with a sawtooth shed roof that floods the interior with natural light . Connections to nature, however, dominate the majority of the design, which boasts two interior gardens on the upper level and carefully framed views of the landscape for indoor-outdoor living. The primary living spaces are located on the open-plan upper floor while the ground level features a much smaller built footprint and is mainly used as a covered outdoor space for living and parking. The prefabricated home can be understood as a series of square modules laid out in a square four-by-four module plan. The compact ground floor, for instance, is made up of three modules: a single outdoor living space and a double-width interior space that connects to the upper floor via a spiral staircase. Upstairs, an open-plan layout with a kitchen, living room and dining area takes up roughly three-quarters of the area while the remaining space is dedicated to the two interior gardens, bedroom and bathroom. Related: Yves Béhar designs compact, prefab homes to tackle the housing crisis Casa CCFF is a domestic factory floating above an untouched garden. The house is built almost entirely in wood, pushing the structural capacities of this natural and sustainable material to its limits. The use of wood for the home also helps reduce the use of concrete to a bare minimum. By incorporating high insulation values and maximizing solar gain , a small heat pump allows the modern home to avoid the use of fossil fuels. + Leopold Banchini Images by Dylan Perrenoud

Read the rest here: 
Experimental prefab home eschews fossil fuels in Geneva

Robotically fabricated Wander Wood Pavilion pops up in just over three days

December 4, 2018 by  
Filed under Green

Traditional materials and futuristic technologies have come together in the Wander Wood Pavilion, a large-scale robotically fabricated structure completed by students at the University of British Columbia in Vancouver. Installed as a temporary addition to the campus grounds, the experimental pavilion was fabricated and assembled in just over three days using a state-of-the-art eight-axis industrial robot at the UBC Center for Advanced Wood Processing . Constructed with built-in seating, the sculptural installation was built mainly of wood, a renewable material selected for its sustainable features and ability to store carbon. Completed in October 2018, the Wander Wood Pavilion is the result of the Robot Made: Large-Scale Robotic Timber Fabrication in Architecture workshop led by David Correa of the University of Waterloo, Oliver David Krieg of LWPAC, and SALA professor AnnaLisa Meyboom. A large team of students, staff, faculty and external partners worked on the project as part of the university’s SEEDS Sustainability Program , an initiative that aims to advance campus sustainability through multidisciplinary projects. Forestry Industry Innovation provided the funding. “Starting with computational tools for parametric design, structural principles for wood construction, robotic CNC milling and digital workflow management, participants were provided with a unique insight into the new opportunities and challenges of advanced design to fabrication processes for timber structures,” explains the team in their project statement. “Parametric design and robotic fabrication are disruptive new technologies in architecture that allow us to build high performance structures of unprecedented formal complexity.” Related: Provocative timber horn explores the hypnotic pull of the unknown The sinuous and latticed form of the sculptural Wander Wood Pavilion not only helps activate the surrounding public area, but its curved shape also creates a cocoon-like environment for visitors using the built-in bench seating. The research workshop installation was installed next to the university fountain in the Martha Piper Plaza. + UBC Center for Advanced Wood Processing Images by David Correa

Read more:
Robotically fabricated Wander Wood Pavilion pops up in just over three days

Bad Behavior has blocked 803 access attempts in the last 7 days.