DIY: How to make your own natural deodorant at home

July 31, 2017 by  
Filed under Green, Recycle

Comments Off on DIY: How to make your own natural deodorant at home

Did you know you can make your own deodorant? It’s not difficult, and you can save money over buying pricey natural deodorants. Best of all, you can mix and match essential oils to create a scent that you really love (or make it unscented). Whether you have sensitive skin or you’re just picky about body care products, making your own natural deodorant is a fun and easy DIY project  you can complete in under an hour. Step One: Gather your materials Most of the ingredients listed below are available in the bulk purchase area of natural food stores or co-ops, as well as online. There are a few ingredients below that can be swapped out, though doing so may slightly change the color, texture, or scent of your deodorant. The recipe listed below makes one batch of deodorant – simply double or triple the recipe to make a larger batch, create different scents, or to share. Ingredients: 1 Tablespoon Coconut Oil 1 Tablespoon Shea Butter (or Cocoa Butter) 1 Tablespoon Baking Soda 1 Tablespoon Arrowroot Powder (or cornstarch) 1 Teaspoon Bentonite Cosmetic Clay (or kaolin) 6 Drops Essential Oil – we used Lavender and Tea Tree Tools: Measuring spoons Mixing spoons Small bowl Small jar or tub to store deodorant in Step Two: Measure coconut oil Measure out one tablespoon of coconut oil and, if it is hardened, mash it in the mixing bowl. RELATED: How to make a summery coconut-sea salt lip scrub Step Three: Measure shea butter Measure one tablespoon of room-temperature shea butter into the bowl and mix it well with the coconut oil. You may substitute room-temperature cocoa butter as well, but it will have a stronger scent. Shea and cocoa butters are a bit harder than coconut oil at room temperature and will help stabilize the deodorant mixture. Step Three: Add baking soda Measure out and add one tablespoon of baking soda. Step Four: Add arrowroot starch Measure out and add one tablespoon of arrowroot starch. This rather unusual ingredient can be found in some larger natural food stores or bulk co-ops, as well as online. If you can’t find any, you can also substitute cornstarch, though its absorptive properties may be slightly lower. RELATED: DIY homemade insect repellent sprays and lotions Step Five: Add clay powder Measure out and add one teaspoon of finely ground cosmetic clay (bentonite or kaolin – found in the bulk or body care section of a natural foods market). Thoroughly mix the deodorant into a thick paste, making sure there are no lumps. Step Six: Add essential oils Add six drops of your favorite essential oil . We used a blend of 3 drops of tea tree oil for its antibacterial properties and astringent odor, in addition to 3 drops of lavender oil for its soothing aroma. Step Seven: Jar it Use a spoon or butter knife to scrape the deodorant into a small jar or other container. You can leave it at room temperature in your bathroom. To apply, simply swipe two or three fingers across the surface of the deodorant and gently rub it into your armpits after a shower. You can put some into a smaller container for travel as well. If you’ve been using commercial aluminum deodorants, you may notice more wetness, but give it a week for your body to adjust. The essential oil blend serves as a deodorant, and the baking soda, arrowroot starch, and clay serve to prevent and absorb perspiration. All photos by Emily Peckenham for Inhabitat

More:
DIY: How to make your own natural deodorant at home

Chicago drinking fountains have been running non-stop for months, and the reason why is infuriating

July 31, 2017 by  
Filed under Green, Recycle

Comments Off on Chicago drinking fountains have been running non-stop for months, and the reason why is infuriating

For the past few months, drinking fountains in Chicago have been running non-stop because the water pipes there contains “dangerously high” lead levels. Ingesting excess levels of lead   (and just to be clear, health officials say no amount of lead exposure is safe ) can cause symptoms such as constipation, vomiting, developmental disabilities, hyperactivity, irritability, insomnia and memory loss. So to address the issue, the city has simply disabled the “push” buttons to let the fountains flow freely, reducing the hazardous levels of lead that actually make it into the water. In April of 2016, WBEZ began investigating the suspicious act of allowing the faucets to flow freely. This week, investigative journalists finally received answers. Reportedly, 450 Chicago park fountains contain “dangerously high” lead levels — with some spouting water with levels 80 times higher than the EPA limit. As a result of the action taken, 450 fountains met EPA standards. However, 107 were still contaminated with lead , which is why officials plan to keep them flowing until mid-fall. An additional 100 or so will be running round-the-clock for “spring flushing” to clear the pipes after winter. While a temporary solution has been found, one cannot ignore the environmental travesty which is occurring by allowing hundreds of faucets to flow freely for not just days, but months on end. For every spigot that is left on, nearly 600 gallons of drinking water are wasted each day. It’s exactly because of this expense that Chicago spent hundreds of thousands of dollars installing on-and-off buttons on the fountains in 2003. Unfortunately, city officials did not plan for lead contamination . Related: Abandoned fountain transformed into a pop-up urban spa in Mexico For now, district officials say they will continue testing and monitoring mountains throughout the summer with rapid detection tests. Fountains that are found to contain high levels of lead will have their samples followed up with additional lab analyses. All in all, plan on packing some purified, spring water if you intend on visiting a Chicago park in the near future. Via WBEZ Images via Pixabay and Deposit Photos

More: 
Chicago drinking fountains have been running non-stop for months, and the reason why is infuriating

These wooden blocks can be stacked up to create cabins, treehouses, and wilderness shelters

July 31, 2017 by  
Filed under Green

Comments Off on These wooden blocks can be stacked up to create cabins, treehouses, and wilderness shelters

Most cabins lie flat upon the earth – but Ofis Arhitekti just unveiled a wooden retreat that’s stacked up into the sky. The architects worked with C+C , C28 and AKT to create a beautiful library made from modular blocks at Ljubljana’s landmark medieval fortress. The basic modular unit provides accommodation for two people, with a kitchen, a bathroom, a bed and seating. If that isn’t enough space, the units can be stacked horizontally or vertically in order to form different configurations to accommodate a variety of locations and needs. Related: Three stacked spruce ‘shoeboxes’ reimagine a 1934 house in Ljubljana The units can be used as holiday cabins, tree houses, research units and shelters . The cabin can be fixed on the ground either by steel anchors or removable concrete cubes, making the interior space endlessly flexible and adjustable based on changing needs. The unit at Ljubljana Castle will serve as a temporary library, with each floor containing books on various topics. Spaces for reading and rest are tucked underneath the underpasses, and offer stunning views of the city. Both the structure and cladding promote Slovenian woodworking, traditional wood crafts and carpentry. + Ofis Arhitekti Photos by Janez Martincic  

More here: 
These wooden blocks can be stacked up to create cabins, treehouses, and wilderness shelters

Dark unused garage is transformed into a cozy light-filled studio in San Francisco

July 31, 2017 by  
Filed under Eco, Green

Comments Off on Dark unused garage is transformed into a cozy light-filled studio in San Francisco

The garage is the last place most people want to cozy up in, but that’s not so for the lucky owners of this beautiful garage-turned-studio space in San Francisco. Local architect Beverly Choe transformed an old, unused garage into the Clifford Studio, a dreamy, light-filled work studio and reading nook. Filled with suffused light and lined with timber, this adaptive reuse project is the perfect cozy hideout brought to life with minimalist decor with splashes of greenery and warm textures. The architect reimagined the garage, formerly a carriage house, as a “box for suffused light” painted shades of blue on the outside. A long skylight spans most of the building and natural light is filtered through the exposed beams that help minimize glare. Large glazed openings at the front and back of the studio let in more natural light and frame views of the outdoor sunken courtyard and garden. Board-formed concrete planters along the western and eastern sides of the courtyard relate to the timber-lined interior, creating a natural outdoor extension of the studio. The courtyard’s sunken profile also helps make the building appear taller. Related: Small and windowless garage in Lisbon transformed into an elegant modern loft Completed over the course of a year-and-a-half, the converted garage makes the most of a small space with the solid oak casework that forms walls of shelves, furnishings, and hidden storage. A blue-tiled bathroom is hidden off on the side of the oak paneling. The minimalist interior is open and airy and allows for flexibility of use, from a reading room to artist’s work studio. The architect treated natural light as a crucial material in the design process. + Beverly Choe Via Dwell Images by Mariko Reed

Excerpt from:
Dark unused garage is transformed into a cozy light-filled studio in San Francisco

Bad Behavior has blocked 2750 access attempts in the last 7 days.